Honeywell FlexLine SmartServo 954 User Manual

MAINTENANCE
266 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
Replacing the drum bearings
1. Open the drum cover.
2. Take out the drum shaft bushing.
3. Replace the bearings, refer to figure below
4. Install the bushing.
5. Install drum and displacer.
6. Close the cover.
Figure 9-8 Replacing the drum shaft bearings
Do not grease the carbon PTFE bearings. The drum bearings do not require any
lubricant at all.

Honeywell FlexLine SmartServo 954 Specifications

General

Brand	Honeywell
Model	FlexLine SmartServo 954
Category	Measuring Instruments
Language	English