Honeywell FlexLine SmartServo 954 User Manual

COMMISSIONING
150 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
All the HART universal commands and some common practice
commands are supported by HCI-HAO. These are listed in the below
tables.
HART Universal Ccommands
Command no. Description
0 Read Unique Identifie
r
1 Read P
r
ima
r
yVa
r
iable
2 Read Loop Current and Percen
t
age of Range
3 Read Dynamic variables and Loop Cur
r
ent
4 Reserved
5 Reserved
6 Write Polling Address
7 Read Loop Configu
r
ation
8 Read Dynamic Variable Classifications
9 Read Device Variable With Status
10 Reserved
11 Read Unique Identifie
r
Associated
w
ith Tag
12 Read Message
13 Read Tag, Descripto
r
,Date
14 Read PV Senso
r
Information
15 Read Device Information
16 Read Final Assembly Numbe
r
17 Write Message
18 Write Tag, Descripto
r
,Date
19 Write Final Assembly Numbe
r
20 Read Long Tag
21 Read Unique Identifie
r
Associated With Long Tag
22 W
r
ite Long Tag
HART Common Practice Commands
Command no. Description
34 Write Primary Variable Damping Value
35 Write Primary Variable Range Values
36 Set Prima
r
y Variable Upper Range Value
37 Set Prima
r
y Variable Lower Range Value
38 Reset Configuration Changed Flags
40 Enter / Exit Fixed Cu
r
rent Mode
41 Perform Self Test
42 Perform Device Reset
44 Write Primary Variable Uni
t
s
48 Read Additional Device S
t
atus
53 Write Device Variable Uni
t
s
72 Squawk

Honeywell FlexLine SmartServo 954 Specifications

General

Brand	Honeywell
Model	FlexLine SmartServo 954
Category	Measuring Instruments
Language	English