EasyManuals Logo
Home>Honeywell>Measuring Instruments>FlexLine SmartServo 954

Honeywell FlexLine SmartServo 954 User Manual

Honeywell FlexLine SmartServo 954
304 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
SAFETY AND SECURITY
Part No.: 4417340 Revision 1 Service Manual 5
954 SmartServo FlexLine
2.6 Personal Safety
WARNING! National, local and company regulations regarding personal
safety must be followed.
Pay attention to the kind of product in the tank. If
there is any danger for your health, wear a gas mask and take all
the necessary precautions.
WARNING! Take appropriate precautions when chemical or toxic product
vapours are present (compressed air, chemical protection suit, and
detection equipment).
2.7 Warnings and Cautions
General
2.7.1.1 Opening of the Instrument
WARNING! DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE MAY BE
PRESENT
When it is required to open the instrument in an explosive
hazardous environment, take care of the following:
WARNING! Make sure that the power to the device is switched off before
you open the covers of the device. Failure to do so may cause
danger to persons or damage the equipment. All covers of the
device must be closed before switching the power on again.
WARNING! Treat the flange surface of the cover and the housing with care.
Keep the flange surface free of dirt. The O-ring must be present
and undamaged.
2.7.1.2 Tools
WARNING! Use non-sparking tools and explosion-proof testers.
Use
suitable explosion-proof tools (for example, testing devices)!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell FlexLine SmartServo 954 and is the answer not in the manual?

Honeywell FlexLine SmartServo 954 Specifications

General IconGeneral
BrandHoneywell
ModelFlexLine SmartServo 954
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals