COMMISSIONING
Part No.: 4417340 Revision 1 Service Manual 57
954 SmartServo FlexLine
Entiti
es
), to the desired specific values. This can either be performed by
using Engauge or HART SmartView (see 5.1 HART SmartView).
Text Conventions
In contrast with explanatory text, all instruction text is preceded by a
☛
All [Entity] and <entity-related> text is recognizable formatted. When -
for instance - all required FlexConn module entities are commissioned,
the [Board Commissioned] entity displays <True>. If not, it displays
<False>.
All !Command! text is also recognizable formatted, If - for instance - an
!Activate! command is given, the result is <Activated>.
In this chapter, each commissioning-instruction text is recognizable
by the Engauge/HART SmartView icon in the margin.
When a commissioning instruction or command cannot be initiated
by HART SmartView, the icon is provided.
To Next Page
Loading...
Need help?
General
