SYSTEM ARCHITECTURE
24 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
Generic Entity
The following command entities are implemented as generic functions.
 “Reset device”
 “Reset board”
The following information is available through the entities.
 “Board name” = FlexConn module name
 “Board hardware version” = Hardware version of the
FlexConn PCB
 “Firmware version” = Version of the software running on the
FlexConn module
The firmware (software) version data is built up according to the format
below:
A 1 0 0 0 0
internal preliminary
bug fixes
minor functionality
warning + measuring data related part
main functionality
hardware modifications
The last digit is not shown in the official or formal releases.
Function-specific Entities
For the function-specific entities, see section COMMISSIONING 7
To Next Page
Loading...
Need help?
General
