HP Integrated Lights-Out User Manual

Using iLO 133
•
•
Vsp
The vsp command invokes a virtual serial port session. When in virtual serial
port session, press <ESC>( to return to the CLI.
Vm
The vm command allows Virtual Media scripting commands to be entered at
the CLI.
vm device insert path inserts an image.
vm device eject ejects an image.
vm device get gets the status of the Virtual Media.
vm device set boot access—sets the status of the virtual media
Command options:
− Valid device names are floppy or cdrom.
− The path is the URL to the media image.
− Boot options are boot_once, boot_always, no_boot, connect or
disconnect.
− Access options are write_protect or write_allow.
Please refer to the commands INSERT_VIRTUAL_MEDIA,
EJECT_VIRTUAL_MEDIA, GET_VM_STATUS, and SET_VM_STATUS
in the "Remote Insight Command Language (on page 269
)" section for more
details on how to use these commands.
Composite Virtual Media is not supported using the CLI. You must specify
Virtual Media images. Refer to the "Virtual Media Scripting (on page 79
)"
section for more information.
• Exit
The exit command stops the CLI session and terminates the SSH connection.

HP Integrated Lights-Out Specifications

General

Brand	HP
Model	Integrated Lights-Out
Category	Software
Language	English