HP Integrated Lights-Out User Manual

322 User Guide Integrated Lights-Out
•
<SERVER_INFO MODE="write">
•
•
•
User does not have correct privilege for action. RESET_SERVER_PRIV
required.
COLD_BOOT_SERVER
This COLD_BOOT_SERVER command is used to cold boot a server. For this
command to parse correctly, the COLD_BOOT_SERVER command must appear
within a SERVER_INFO command block, and SERVER_INFO MODE must be
set to write. The user must have the virtual power and reset privilege to execute
this command.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<COLD_BOOT_SERVER/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
COLD_BOOT_SERVER Parameters
There are no parameters for this command.
COLD_BOOT_SERVER Runtime Errors
The possible error messages include:
Server information is open for read-only access. Write access is required for
this operation.
Host power is already OFF.
User does not have correct privilege for action. RESET_SERVER_PRIV
required.

HP Integrated Lights-Out Specifications

General

Brand	HP
Model	Integrated Lights-Out
Category	Software
Language	English