HP Integrated Lights-Out User Manual

38 User Guide Integrated Lights-Out
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="Admin" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_NETWORK_SETTINGS>
<ENCLOSURE_IP_ENABLE VALUE="Yes"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
Integration with RILOE II Accessory Boards
RILOE II is supported as an option in servers with iLO. Previous generations of
the Remote Insight boards, such as the Remote Insight board/PCI and the original
RILOE, are not supported in servers with iLO.
iLO firmware detects the presence of RILOE II and automatically disables iLO
functionality. Additionally, if iLO firmware detects the presence of the original
RILOE, and iLO displays an invalid configuration message.
To re-enable iLO functionality after a RILOE II is removed, use the Security
Override Switch and iLO RBSU (on page 22
). Select Settings>Enabled for the
Enable Lights-Out Functionality (on page 340
) setting.

HP Integrated Lights-Out Specifications

General

Brand	HP
Model	Integrated Lights-Out
Category	Software
Language	English