HP Integrated Lights-Out User Manual

208 User Guide Integrated Lights-Out
HPQLOMIG Operation
The command line utility is intended to be used in conjunction with Insight
Manager 7 and Systems Insight Manager. If you are not using Insight Manager 7
or Systems Insight Manager, consider using the HPQLOMIG utility.
IMPORTANT: Installing directory support for any management
processor requires downloading the HP Smart Component. Refer to the
"Pre-Migration Checklist (on page 206
)" and the "HP Lights-Out
Directory Package" sections for additional information. Extending the
schema must be completed by a Schema Administrator.
HPQLOMIG requires logon and upgrade firmware privileges for each
management processor. Change directory setting privileges are required for
directory services.
Finding Management Processors
The first step to migrating is to discover all management processors you want to
enable for directory services. You can search for management processors using
DNS names, IP addresses, or IP address wildcards. The following rules apply to
the variables entered in the Addresses field:
•
•
•
DNS names, IP addresses, and IP address wildcards must be delimited with a
semicolon.
The IP address wildcard uses the "*" character in the third and fourth octet
fields. For example, IP address 16.100.*.* is valid, whereas IP address
16.*.*.* is not. Ranges can also be specified using a hyphen. For example,
192.168.0.2-10 is a valid range. A hyphen is only supported in the rightmost
octet.
After the user clicks Find, HPQLOMIG begins pinging and connecting to
port 443 (the default SSL port). The purpose of these actions is to quickly
determine if the target network address is a management processor. If the
device does not respond to the ping or connect appropriately on port 443,
then it is determined not to be a management processor.

HP Integrated Lights-Out Specifications

General

Brand	HP
Model	Integrated Lights-Out
Category	Software
Language	English