Step 5 Log in to the ECC800-Pro WebUI.
1. Enter https://monitoring IP address (such as monitoring IP address https://
192.168.8.10) in the address box of the browser, and then press Enter to
enter the WebUI login page.
Figure 5-5 WebUI login page
2. On the login page, enter the preset user name admin and preset password
Changeme, set the language, and click Log In.
– After the rst login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. Huawei will not be
liable for any security issues caused by your failure to change the preset password
in time or password loss after changing.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event
notication is congured and the password retrieval mode is
congured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
----End
5.3.2 Preparations and App Login
Prerequisites
App operating environment requirements:
● The mobile device runs Android 4.0 or later and the operating system is not
rooted.
● The mobile device has sucient battery reserve.
● You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 112
To Next Page
Loading...
Need help?
General