5.3.11.1.6 Installing NE Adapters
Install the NE adapters on the NetEco.
Prerequisites
You have obtained the adapter software installation packages.
Procedure
1. Choose Device Management > Conguration > Device Integration.
2. In the navigation tree on the left, choose Adapter Management and click
Upload.
3. On the page that is displayed, click + to select the
le to be uploaded.
4. Click Upload to upload the les.
5. Select the NE adapter packages to be installed on the Adapter Management
page, and click Install. Then, click Yes in the displayed dialog box.
The time required for the installation is related to the number of adapters.
Wait for the installation to complete.
5.3.11.1.7 General Operation: Adding a Management Domain
This section describes how to create a management domain.
Prerequisites
The management domain adapter has been
precongured or installed.
Context
● The management domains include Park, Building, Room, ContainerDC,
Subnet, NetecoSite, FusionModule500, Modular, Room-ShapeNode, and
Building-ShapeNode. You are advised to plan the subordinate relationship
between management domains and devices before performing operations.
● The NetEco is precongured with management domains such as cabinets,
battery cabinets, buildings, containers, oors, FusionModule500, smart
modules, NetEco sites, parks, PDUs, equipment rooms, and subnets. To use
more management domains, you need to install the corresponding adapter
software package on the NetEco.
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management >
Conguration > Planning
Conguration.
Step 3 Choose the upper-layer node of the management domain to be added in the
navigation tree on the left.
Step 4 In the Domain area on the lower left of the page, drag a management domain
icon to the required position in the planning
conguration area.
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 143