5.3.11.1.9 Creating an ECC800-Pro on the NetEco
Prerequisites
● You have logged in to the NetEco client by web browser.
● You have created modules in Data Center Planning.
Context
For detailed operations, see
iManager NetEco 6000 Device Installation and
Commissioning Guide
of the corresponding version.
Procedure
1. Choose System > Conguration > Data Center Planning from the main
menu. The Data Center Planning window is displayed.
2. Click
in the upper left area of the Data Center Planning window.
3. Click Access switch to the Add Device window. You can add an ECC800-Pro
device to the
specied modular in the Add Device window.
Figure 5-21 Adding an ECC800-Pro device to the modular
Click OK, and you can view the task information, including Type, Device Name,
Region, Progress, Status, Start Time, End Time, and Information in the displayed
Progress window.
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 147
To Next Page
Loading...
Need help?
General