Observe regulatory information
Observe the following regulatory information and guidelines:
• Legal and local regulations for accident prevention
• Legal and local regulations for environmental protection
• Country-specific regulations, organization-specific regulations
Proper/Designated Use
Claims for defects or liability, regardless of the legal foundation, do not apply
with incorrect or improper installation, commissioning, usage, handling,
storage, maintenance, repair, use of unsuitable components or other
circumstances for which HYDAC is not responsible.
HYDAC is not responsible for the installation, integration, selection of
interfaces to / into your system nor for the use or functionality of your system.
Only use the sensor for the application described in the following.
The ContaminationSensor CS1000 serves to continuously monitor solid
particulate contamination in hydraulic and lubrication systems.
Proper/designated use of the product extends to the following:
• observing all instructions contained in the instruction manual.
• performing inspection and maintenance work.
Depending on the version (see model code), you may use the CS only in
connection with the following media:
NOTICE
Impermissible operating media
The ContaminationSensor will be destroyed.
► Operate the ContaminationSensor only with the permissible operating
fluids:
- CS 1xx0 is suitable for operation with mineral oils or
mineral-oil-based raffinates.
- CS 1xx1 is suitable for phosphate esters.
► Note the maximum operating pressure of 350 bar / 5075 psi.
ContaminationSensor CS1000
en(us)
Page 12 / 136
BeWa CS1000 3764916d 300 en-us 2017-09-25.docx 2017-09-25
To Next Page
Loading...
Need help?
General
