CS1000 Characteristics
The ContaminationSensor Series CS1000 is a stationary measurement unit
for the continuous monitoring of particulate contamination in hydraulic and
lubrication systems.
The CS is designed to be used in low- or high-pressure hydraulic and
lubrication circuits and test benches where a small amount of oil (between 30
ml/min and 500 ml/min) is diverted for measurement purposes.
The ContaminationSensor is approved for a maximum operating pressure
(see specification on type label) and viscosity of up to 1000 mm²/s.
Particulate contamination is detected with an optical measurement cell
The sensor is available with the following options:
• with or without 6-digit display and keypad (can be rotated by 270°)
• with 4 - 20 mA or 2 - 10 V analogue output
• Results are output as a cleanliness code according to:
4406:1999 and ISOSAE or
AS 4059 4406:1987 and ISO or ISO4406:1999 and NAS SAEAS 4059
• pipe / hose installation or flange installation
All models feature an analog electric output and an RS485 interface for
outputting the measured cleanliness class. In addition, all CS1000's have a
switching output.
ContaminationSensor CS1000
en(us)
Page 18 / 136
BeWa CS1000 3764916d 300 en-us 2017-09-25.docx 2017-09-25
To Next Page
Loading...
Need help?
General
