Hydac CS1000 series - Flange Connection Type (Type Cs1 Xxx-X-X-X-X-1;-XXX)

Hydraulic sensor connection
Flange connection type (Type CS1xxx-x-x-x-x-1/-xxx)
The hydraulic connection is done via ports C and D. Two O-rings are used to
form a seal between the CS and a flange, connecting plate or manifold
mount. Four CS1000 threads are prepared for fixing the M6. Ports A and B
are sealed off with screw plugs [1]. Sealing with the manifold block or
mounting plate is done via two O-rings [2] (4.48 x 1.78 FPM, see Chapter
"Spare Parts + Accessories").
View from below. All dimensions in mm.
ContaminationSensor CS1000
en(us)
Page 24 / 136
BeWa CS1000 3764916d 300 en-us 2017-09-25.docx 2017-09-25