IBM 2145UPS-1U User Manual

SAN Volume Controller 2145-4F2 connectors
The external connectors for the SAN Volume Controller can be located easily.
Context
Figure 73 provides the locations of the external connectors.
1
Power connector
2
fibre-channel port 3
3
fibre-channel port 4
4
Ethernet port 2 (not used on the SAN Volume Controller 2145-4F2)
5
Ethernet port 1
6
Serial connector
7
fibre-channel port 2
8
fibre-channel port 1
The
following figure shows an illustration of the type of connector located on the
power supply assembly. The connector allows you to connect the SAN Volume
Controller 2145-4F2 to the power source from the uninterruptible power supply.
Using the 2145 UPS
The 2145 uninterruptible power supply (2145 UPS) provides a SAN Volume
Controller 2145-4F2 node with a secondary power source if you lose power from
your primary power source due to power failures, power sags, power surges, or
line noise.
21
3
4
5
6
7
8
Figure 73. SAN Volume Controller 2145-4F2 connector locations
Ground
Live
Neutral
Appendix B. SAN Volume Controller 2145-4F2 107

IBM 2145UPS-1U Specifications

General

Brand	IBM
Model	2145UPS-1U
Category	UPS
Language	English