Appendix B — Default Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual 131
Wireless 802.11 Network Settings
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Network > IPv4 or IPv6.
• From the printer web page, click the Configure tab,
Communications > Wireless 802.11.
Power Mode Select the power management setting for the
radio. Constant Awake provides the highest
throughput but draws the most power. Power
Saving conserves the most power but
provides the lowest throughput. Fast Power
Saving turns off components when they are
not being used to draw less current.
Constant
Awake
Channel Sets the common channel that radios in Ad
Hoc mode use to transfer data. Range is 1 to
14.
1
Hidden
SSID
Determines if the radio is allowed to look for
SSIDs that have been hidden to prevent
unauthorized devices from connecting to the
wireless network.
Disable
Wireless 802.11 General Settings (Continued)
Setting Description Default
Wireless 802.11 Network Settings
Setting Description Default
(IPv4) IP
Assignment
Method
Sets how the printer obtains an IP
address (for IPv4 networks).
DHCP
(IPv4) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv4 network.
0.0.0.0
Subnet Mask Sets a number that defines the range of
IP addresses that can be used in an IPv4
network.
0.0.0.0
To Next Page
Loading...
Need help?
General