Chapter 2 — Set Up the Printer
24 PM23c, PM43, and PM43c Mid-Range Printer User Manual
About Media
The printers can print on labels, tickets, tags, and continuous stock.
The procedure you use to load media depends on how you are
operating the printer and the options you have installed.
About Linerless Media
If you are printing on linerless media, follow these guidelines for best
results:
• You must install the linerless roller accessory before printing. For
more information on this accessory, contact your local Intermec
representative.
• When removing printed labels on linerless media, tear the label up
towards the top of the printer to prevent media jams.
• Do not use linerless media with the cutter accessory.
About Tear-Off Printing
For tear-off printing, you manually tear printed labels, tickets, and
other printed media from the front of the printer. You can use these
types of media for tear-off printing:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
Load Media for Tear-Off Printing
You can install an optional label taken sensor that detects when the
current label is removed and prints the next label.
1 Open the media cover.
To Next Page
Loading...
Need help?
General