Chapter 3 — Connect the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 47
9 Follow the instructions to install your printer:
• Make sure you select the correct printhead resolution (203, 300,
or 406 dpi).
• (Optional) To change the printer name, type a new Printer
Name.
• (Optional) To make the printer the default, select Use this
printer as the default printer.
• (Optional) To share the printer, select Share name and type a
name for the printer.
10 Click Finish to install the printer drivers, and then click Close to
exit DriverWizard.
How to Connect the Printer to Your PC
You can connect the printer to your PC using one of these cables:
• Serial cable
• USB cable
• IEEE 1284 parallel printer adapter cable (optional)
Connect the Printer Using a Serial Cable
You can use a serial connection to communicate with your PC and to
run PrintSet or InterDriver. You can also use the serial port to send
commands directly to the printer through a terminal connection.
1 Connect one end of the DB9 to DB9 RS-232 cable to the back of
your printer and connect the other end of the cable to a serial COM
port on the PC.
2 If necessary, change the PC serial port configuration to match your
printer.
To Next Page
Loading...
Need help?
General