Chapter 3 — Connect the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 53
8 When you receive confirmation that the certificate was installed,
type this command to make sure you see a .pem file and another
soft link to the same file: ls -la.
9 Use the printer web page, the Main Menu on a full touch printer, or
PrintSet 5 to specify the certificate .pem file to use for security.
About Bluetooth Communications
The printer supports Bluetooth communications when the optional
Wi-Fi+Bluetooth module is installed. When Bluetooth is enabled, you
can use a Bluetooth bar code scanner to send scanned data directly to
a Fingerprint application. You can also make the printer discoverable
by other Bluetooth devices, and enable security if required.
You can set up Bluetooth communications:
• from the printer web page.
• from the printer Main Menu.
• using Intermec PrintSet through a USB connection to a PC.
Connect to a Bluetooth Device
If your printer has the full touch display, you can use the Bluetooth
wizard to discover and connect to an HID Bluetooth device such as a
keyboard or a Bluetooth scanner configured as an HID slave.
1 Make sure your Bluetooth device is turned on and discoverable,
and that the device is in range of the printer.
2 From the printer Ready screen, select the Main Menu.
3 Select Wizards > Communications > Bluetooth.
4 Follow the instructions to discover and connect to your Bluetooth
device.
If you are unable to connect to the Bluetooth device, you may need
to change the printer Bluetooth settings.
To Next Page
Loading...
Need help?
General