Chapter 4 — Configure the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 75
About Printer Profiles
After you change printer default settings to meet your needs, you can
save those settings as a printer profile. The printer supports multiple
profiles that you can save and load at any time. For example, you can
create one profile to use when you are printing on continuous label
stock, and a different profile to use when you are printing on label
stock with gaps. Printer profiles are only supported from the Main
Menu on the full touch printer.
The following printer settings are not saved in a profile:
• IP address for either IPv4 or IPv6 networks
• Media calibration settings for the label stop sensor
• Remote port or remote host values for a remote computer
accessing the printer through raw TCP
Save a Printer Profile from the Main Menu
Use this procedure to save the current settings as a printer profile.
1 From the Ready screen, press the Main Menu button. The Main
Menu appears.
2 Select Tools > Profiles. The Profiles menu appears.
3 Select Save. The Save Profile menu appears.
4 Select the Filename text box and type a name for the profile. The
profiles can have up to sixteen characters.
To Next Page
Loading...
Need help?
General