Chapter 4 — Configure the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 71
Touchless configuration supports the configuration of these settings:
• Command language
• IPv4 Settings
• Localized language
• RS-232
• Paper type or label/media
• SSID
1 Hold the IP30 in a horizontal orientation.
2 Stand in front of the touchless configuration label and hold the
IP30 within 10 cm of the packaging surface.
3 Execute the write or read command.
About Uploading Fonts, Images, Applications,
Formats, and Web Pages
You can use the printer web page, a USB storage device, or PrintSet to
upload fonts, images, applications, formats, and web forms to the
printer. You can only delete fonts, images, applications, and web forms
that you upload to the printer. You cannot delete the files that are
installed as part of the printer firmware.
Upload Fonts, Images, Applications, Formats, and Web
Forms from the Web Page
You can use the printer web page to install fonts, images, applications,
formats, and web forms to the printer.
1 Open a web browser on your PC.
2 In the address bar, type the IP address of your printer and press
Enter. The printer web page appears.
3 Click Login. The Login page appears.
4 Type your Username and Password and then click Login. The
default value for Username is itadmin and the default value for
Password is pass.
To Next Page
Loading...
Need help?
General