Intermec PM23c User Manual

Appendix B — Default Settings
142 PM23c, PM43, and PM43c Mid-Range Printer User Manual
System Network Services
This section lists the network services you can manage from the
printer. You will only see Manage Services from the menus if you have
an Ethernet or Wireless module installed in the printer. To view these
services:
• From the printer Main Menu, select Settings > System Settings >
Manage Services.
• From the printer web page, click the Configure tab, System
Settings > Manage Services.
System I/O Settings
Setting Description Default
Wireless 802.11 Determines if the printer is allowed to
communicate using its 802.11 radio.
Supported only if the optional
Wi-Fi+Bluetooth module is installed.
Enable
Bluetooth Determines if the printer is allowed to
communicate using its Bluetooth radio.
Supported only if the optional
Wi-Fi+Bluetooth module is installed.
Enable
RFID Determines if the printer is allowed to
communicate using its RFID radio. Supported
only if the RFID module is installed.
Enable
Virtual COM Determines if you can enable the USB port to
be used as a virtual serial port.
Disable
System Network Services
Service Description Default
Web Server Determines if the web server is enabled in the
printer.
Enable
FTP Determines if the printer can use File Transfer
Protocol (FTP).
Enable
Avalanche Determines if the printer can be managed by
Wavelink Avalanche.
Enable
Net1 Determines if the printer can use Telnet to
communicate with Fingerprint.
Enable

Intermec PM23c Specifications

General

Brand	Intermec
Model	PM23c
Category	Printer
Language	English