Intermec PM23c User Manual

Appendix B — Default Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual 139
Print Quality Settings
This section describes print quality settings. To view these settings:
• From the printer Main Menu, select Settings > Printing > Print
Quality.
• From the printer web page, click the Configure tab, Printing >
Print Quality.
General System Settings
This section describes general system settings. To view these settings:
• From the printer Main Menu, select Settings > System Settings >
General.
• From the printer web page, click the Configure tab, System
Settings > General.
Print Quality Settings
Setting Description Default
Print Speed Sets how fast the printer prints labels. The
unit of measure is defined in the Unit of
Measure parameter.
100
Media Sensitivity Sets the level of sensitivity of the media to the
printhead heat for media and ribbon.
Variable
Darkness Sets the image darkness for media and ribbon.
Adjust this parameter with the Media
Sensitivity parameter. Range is 1 to 100.
Variable
Contrast Adjusts the blackness of the printing on the
label in 2% increments from -10% to +10%.
+0%
General System Settings
Setting Description Default
System Name Sets the network identification
name (WINS name) of the
printer.
Printer model
number and serial
number. For
example,
PM43-000000011.
System Location Sets the location of the printer. Empty string

Intermec PM23c Specifications

General

Brand	Intermec
Model	PM23c
Category	Printer
Language	English