Chapter 1 — About the Printer
12 PM23c, PM43, and PM43c Mid-Range Printer User Manual
About the Main Menu
In the printer Ready screen, press to view the Main Menu.
Press one of the buttons to select the Programs, Settings, Tools, or
Wizards menu:
• Select Programs to see a list of programs installed on the printer.
This list includes utility programs provided by Intermec as part of
the printer firmware, and programs you have installed on the
printer.
The Programs item appears in the Main Menu only if the printer
is using Fingerprint or Direct Protocol as the command language.
• Select Settings to view and change printer settings.
• Select Tools to print test labels, manage a connected USB storage
device, restore printer default settings, or save and load printer
profiles.
• Select Wizards to see a list of wizards that help you configure
printing or communication settings, or calibrate the media
sensors.
How to Navigate in the Main Menu
Use the status bar buttons to navigate between menus in the Main
menu and save changes.
Note: The printer cannot print while the Main Menu is onscreen. You
need to exit the Main Menu and return to the Ready screen to begin
printing.
To Next Page
Loading...
Need help?
General