Intermec PM23c User Manual

Appendix B — Default Settings
134 PM23c, PM43, and PM43c Mid-Range Printer User Manual
Bluetooth Settings
This section describes Bluetooth settings for the printer. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Bluetooth.
• From the printer web page, click the Configure tab,
Communications > Bluetooth.
Server Common
Name 2
Sets the certificate name that is on
the secondary authentication server.
If this value is none, then the value
for Server Common Name 1 is used.
Range is 1 to 96 characters.
None
Validate
Certificate
Determines if the identity of the
authentication server is verified
using its certificate when using
EAP-TTLS, PEAP, or EAP-TLS.
Intermec recommends that you set
Validate Certificate to Yes.
No
PAC Sets the name of the Protected Access
Credential (PAC) that is used for
EAP-FAST authentication. The
printer uses this file if Acquire PAC is
on and the current installed PAC fails
to authenticate the printer to the
network.
eap-fast.pac
Acquire PAC Determines if automatic PAC file
provisioning is on for EAP-FAST
authentication.
On
Fast Roaming
(CCKM)
Determines if the printer can roam
from one access point to another
without reauthenticating with the
server. CCKM only works in wireless
networks using LEAP.
Disable
Mixed Mode
(Group=TKIP)
Determines if the printer can use
either TKIP or AES for data
encryption, depending on the
configuration of the access point.
Disable
Wireless 802.11 Security Settings (Continued)
Setting Description Default

Intermec PM23c Specifications

General

Brand	Intermec
Model	PM23c
Category	Printer
Language	English