Intermec PM23c User Manual

Appendix B — Default Settings
PM23c, PM43, and PM43c Mid-Range Printer User Manual 133
Network Key
Index
Selects the active network key to use
for WEP security. Range is 1 to 4.
1
Network Key 1,
Network Key 2,
Network Key 3,
Network Key 4
Defines a network key that is used for
WEP security. Keys are entered in
ASCII or hexadecimal (preceded by
0x) format.
Empty string
User Name Sets the name that the printer uses
when logging in to the network.
Range is 1 to 96 characters.
None
Password Sets the password that the printer
uses when logging in to the network.
Range is 1 to 96 characters.
None
Anonymous
Name
Sets the outer EAP user name that
the printer uses for logging in to the
network. Maximum length is 96
characters.
Empty string
Inner
Authentication
Selects the authentication method
that is used when the EAP type is
EAP-FAST, PEAP, or TTLS.
MSCHAPv2
CA Certificate Sets the name of the Certificate
Authority (CA) that verifies the server
certificate. This CA should be the
same one that was used to sign the
server certificate.
intermec.pem
Client Certificate Sets the name of the client certificate
the printer uses to authenticate to
the network using EAP-TLS.
Maximum length is 128 characters.
None
Client Key Sets the private key the printer uses
for EAP-TLS. Maximum length is 128
characters. Use the certinstall.sh
script to install the certificate
correctly.
None
Server Common
Name 1
Sets the certificate name that is on
the primary authentication server. If
this value is none, then the value for
Server Common Name 2 is used.
Range is 1 to 96 characters.
None
Wireless 802.11 Security Settings (Continued)
Setting Description Default

Intermec PM23c Specifications

General

Brand	Intermec
Model	PM23c
Category	Printer
Language	English