Chapter 5 — Troubleshoot the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual 85
About Alerts
To help maintain the printer, you can configure the printer to send
alert messages when certain conditions occur. For example, the printer
can send a message when the odometer reaches a certain value, or if the
printhead is lifted during printing.
There are three types of alerts:
• Error alerts
• Information alerts
• Warning alerts
You configure alert settings in the printer web page. Alert messages can
be sent to an email address, an SNMP trap, or both. You can enable or
disable each type of alert, set the number of times the alert is repeated,
set the unit of measure that determines how often the alert is sent, and
change the default text message for the alert.
Configure Error Alert Notification
The way you receive error alerts is determined by the notification
method you configure. You can choose between receiving notifications
by SNMP trap, email, or SNMP trap + email. To configure the way you
are notified about error alerts:
• From the printer Main Menu, select Settings > System Settings >
General > Alert Notification Method.
• From the printer web page, login and then click the Configure tab
> System Settings > General > Alert Notification Method.
To Next Page
Loading...
Need help?
General