ITech IT7900 Series Programming Guide

CONFigurate IO Subsystem
Copyright © ITECH Electronic Co., Ltd. 93
Chapter13 CONFigurate IO Subsystem
[CONFigurable:]IO:SELect <NR1>
This command is used to select and query IO.
Syntax
[CONFigurable:]IO:SELect <NR1>
Argument
<NR1>
[1,7]
Query syntax
[CONFigurable:]IO:SELect?
Returns
<NR1>
Example
IO:SEL 7
[CONFigurable:]IO:REVErse <NR1>,<CPD>
This command is used to set and query whether the IO port signal is reversed.
The first parameter is the IO number, and the second parameter is the reverse
state.
Syntax
[CONFigurable:]IO:REVErse <NR1>,<CPD>
Argument
<NR1>,<CPD>
[1,7],0|OFF|1|ON
Query syntax
[CONFigurable:]IO:REVErse? <NR1>
Returns
CPD
Example
IO:REVE 7,0

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English