ITech IT7900 Series Programming Guide

FETCh & MEASure Commands
Copyright © ITECH Electronic Co., Ltd. 75
Syntax:
FETCh[:SCALar]:ARRay:VOLTage:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
Arguments:
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1: 0-50
Returns:
<NRf>
Example:
FETC:ARR:VOLT:HARM:DIST? 6
FETCh[:SCALar]:ARRay:CURRent:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
MEASure[:SCALar]:ARRay:CURRent:HARMonic:DISTor
t? <[A|B|C|CH1|CH2|CH3]>,<NR1>
This command is used to measure each harmonic distortion of the current.
Syntax:
FETCh[:SCALar]:ARRay:CURRent:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
Arguments:
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1: 0-50
Returns:
<NRf>
Example:
FETC:ARR:CURR:HARM:DIST? 6
VETCor:OEDer <NR1>
This command is used to set and query the order of the vector diagram.
Syntax:
VETCor:OEDer
Arguments:
<NR1>

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English