ITech IT7900 Series Programming Guide

SOURce Commands
Copyright © ITECH Electronic Co., Ltd. 31
Returns:
LIMit|SHUTup
[SOURce:]CURRent:PROTection:PEAK <NRf+> [,CH1|CH2|CH3]
This command sets the peak current protection value of the power supply.
Note: the second parameter [,CH1|CH2|CH3] is optional and only valid in
multi-channel mode.
Syntax:
CURRent:PROTection:PEAK <NRf+> [,CH1|CH2|CH3]
Arguments:
MAXimum|MINimum|DEFault
Query syntax:
CURRent:PROTection:PEAK? [CH1|CH2|CH3],[MAXimum|MINimum|DEFault]
Returns:
MAXimum|MINimum|DEFault
Example
CURR:PROT:PEAK 30
CURR:PROT:PEAK 10,1
[SOURce:]CURRent:PROTection:PEAK?
[CH1|CH2|CH3],[MAXimum|MINimum|DEFault]
This command is used to query the peak current protection value of the power
supply.
Note: both parameters of this query command are optional.
Syntax:
CURRent:PROTection:PEAK? [CH1|CH2|CH3],[MAXimum|MINimum|DEFault]
Arguments:
MAXimum|MINimum|DEFault
Returns:
MAXimum|MINimum|DEFault
Example
CURR:PROT:PEAK?
CURR:PROT:PEAK? MAX|MIN
CURR:PROT:PEAK? 1,MAX|MIN

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English