ITech IT7900 Series Programming Guide

FETCh & MEASure Commands
Copyright © ITECH Electronic Co., Ltd. 70
Syntax:
FETCh[:SCALar]:VOLTage:HARMonic:DISTort? <[A|B|C|CH1|CH2|CH3]>,<NR1>
Arguments:
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1: 0-50
Returns:
<NRf>
Example:
FETC:VOLT:HARM:DIST? A,8
FETCh[:SCALar]:CURRent:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
MEASure[:SCALar]:CURRent:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
This command is used to measure current harmonic components.
Syntax:
FETCh[:SCALar]:CURRent:HARMonic:DISTort?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
Arguments:
<[A|B|C|CH1|CH2|CH3]>,<NR1>
NR1: 0-50
Returns:
<NRf>
Example:
FETC:CURR:HARM:DIST? 3,10
FETCh[:SCALar]:VOLTage:HARMonic:PHASe?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
MEASure[:SCALar]:VOLTage:HARMonic:PHASe?
<[A|B|C|CH1|CH2|CH3]>,<NR1>
This command is used to measure the phase of voltage harmonics.

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English