ITech IT7900 Series Programming Guide

SCOPe Subsystem
Copyright © ITECH Electronic Co., Ltd. 113
Query syntax
SCOPe:CURRent:SCALe?
Returns
<NRf>
Example
SCOPe:CURRent:SCALe 30
SCOPe:TIMebase:DELay <NRf>
This command is used to set and query the trigger delay of the oscilloscope, unit:
s.
Syntax
SCOPe:TIMebase:DELay <NRf>
Argument
[MINimum|MAXimum]
Query syntax
SCOPe:TIMebase:DELay?
Returns
<NRf>
Example
SCOPe:TIMebase:DELay 3
SCOPe:TRIGger:LEVel <NRf>
This command is used to set and query the trigger level of the oscilloscope.
Syntax
SCOPe:TRIGger:LEVel <NRf>
Argument
[MINimum|MAXimum]
Query syntax
SCOPe:TRIGger:LEVel?
Returns
<NRf>

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English