ITech IT7900 Series Programming Guide

SURGesag Subsystem
Copyright © ITECH Electronic Co., Ltd. 107
SURGesag:REPeat:COUNt <NR1>
This command is used to set and query the number of continuous surge/trap
waves.
<NR1+>: set value of continuously generated surge/trap waves.
Syntax
SURGesag:REPeat:COUNt <NR1>
Argument
<NR1>
*RST
1
Query syntax
SURGesag:REPeat:COUNt?
Returns
<NR1>
Example
SURGesag:REPeat:COUNt 5 //Set the number of continuous surge/trap waves
to 5.
SURGesag:PERiod:COUNt <NR1>
This command is used to set and query the period interval of the surge/trap wave
occurrence.
<NR1+>: the period interval setting value of the surge/trap wave occurrence.
Syntax
SURGesag:PERiod:COUNt <NR1>
Argument
<NR1>
*RST
1
Query syntax
SURGesag:PERiod:COUNt?
Returns
<NR1>

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English