ITech IT7900 Series Programming Guide

FETCh & MEASure Commands
Copyright © ITECH Electronic Co., Ltd. 64
Syntax:
FETCh[:SCALar]:POWer:PFACtor? [A|B|C|CH1|CH2|CH3]
Arguments:
[A|B|C|CH1|CH2|CH3]
Returns:
<NRf>…
Example:
FETC:POW:PFAC?
FETCh[:SCALar]:VOLTage[:AC]?
MEASure[:SCALar]:VOLTage[:AC]?
This command is used to read the effective value of single-phase voltage.
Note: this command parameter is optional. If there is no parameter, it will return
the value of A, B, C three-phase by default.
Syntax:
FETCh[:SCALar]:VOLTage? [A|B|C|CH1|CH2|CH3]
Arguments:
[A|B|C|CH1|CH2|CH3]
Returns:
<NRf>…
Example:
FETC:VOLT?
FETCh[:SCALar]:VOLTage:DC?
MEASure[:SCALar]:VOLTage:DC?
This command is used to read the DC component of single-phase voltage.
Note: this command parameter is optional. If there is no parameter, it will return
the value of A, B, C three-phase by default.
Syntax:
FETCh[:SCALar]:VOLTage:DC? [A|B|C|CH1|CH2|CH3]

ITech IT7900 Series Specifications

General

Brand	ITech
Model	IT7900 Series
Category	Power Supply
Language	English