SCPI status register
Copyright © ITECH Electronic Co., Ltd. 11
Output is in constant current.
Output is in constant voltage.
Output is in constant current.
Output is in constant resistance.
Calibration is in progress
Device type 0,Used in conjunction
with device type 1
External analog control mode
All commands before and including
*OPC have been executed.
The instrument tried to read the
output buffer but it was empty, a
new command line was received
before a previous query has been
read, or both the input and output
buffers are full.
A device-specific error, including a
self-test error, calibration error or
other device-specific error
occurred.
An execution error occurred.
A command syntax error occurred.
Power has been cycled since the
last time the event register was
read or cleared.
This bit is set to 1 when any one
status of enabled query status
register changes.
Bit ESB is set to 1 when the status
of an enabled standard event
status.
To Next Page
Loading...
Need help?
General
