If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX110 Services Gateway contains the chassis with installed
components, listed in Table 31 on page 82, and an accessory box, which contains the
parts listed in Table 32 on page 82.
NOTE: The parts shipped with your device can vary depending on the
configuration you ordered.
Table 31: Parts List for a Fully Configured SRX110 Services Gateway
QuantityPart
1SRX110 Services Gateway with 8xFE ports, 1xUSB port, 1x3G-WAN USB port,
and base memory (1 GB RAM, 1 GB Flash)
1Power supply adapter of 60 watts
13-Prong Power Cord
1DB-9 to RJ-45 Adapter, Straight Through, 7 feet
1Extension cable for 3G USB modem
Table 32: Accessory Parts List for the SRX110 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1Quick Start Guide
1Security Products Safety Guide
1Juniper Compliance Form Letter
1Product Registration
NOTE: The mounting kits available for rack, wall, and desk installation of the
SRX110 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
Related
Documentation
• Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 78
• Unpacking the SRX110 Services Gateway on page 81
Copyright © 2012, Juniper Networks, Inc.82
SRX110 Services Gateway Hardware
To Next Page
Loading...
Need help?
General
