Juniper SRX110 User Manual

CHAPTER 9
Interface Cable Specifications and
Connector Pinouts
•
Interface Cable and Wire Specifications for the SRX110 Services Gateway on page 71
•
RJ-45 Connector Pinouts for the SRX110 Services Gateway Ethernet Port on page 72
•
RJ-45 Connector Pinouts for the SRX110 Services Gateway Console Port on page 73
•
RJ-11 Connector Pinouts for the SRX110 Services Gateway on page 74
Interface Cable and Wire Specifications for the SRX110 Services Gateway
Table 24 on page 71 lists the specifications for the cables that connect to ports.
Table 24: Cable and Wire Specifications for Ports
Device Receptacle
Maximum
LengthCable/Wire RequiredCable SpecificationPort
RJ-456 ft
(1.83 m)
One 6 ft (1.83 m) length
with DB-9/RJ-45
connectors
RS-232 (EIA-232)
serial cable
Console
port
RJ-45328 ft
(100 m)
One 15 ft (4.57 m)
length with RJ-45/RJ-45
connectors
CAT-5e (Category 5)
cable or equivalent
suitable for
100BASE-T
operation
Ethernet
port
•
For
VDSL/ADSL-POTS:
RJ-11
•
For
VDSL/ADSL-ISDN:
RJ-45
18K ft
(5.486K
m)
•
For
VDSL/ADSL-POTS:
One 10 ft (3.048 m)
with RJ-11 connector
•
For
VDSL/ADSL-ISDN:
One 10 ft (3.048 m)
with RJ-45 connector
•
For
VDSL/ADSL-POTS:
RJ-11 cable
•
For
VDSL/ADSL-ISDN:
RJ-11/RJ-45 cable
VDSL2
port
Related
Documentation
RJ-45 Connector Pinouts for the SRX110 Services Gateway Ethernet Port on page 72•
• RJ-45 Connector Pinouts for the SRX110 Services Gateway Console Port on page 73
• RJ-11 Connector Pinouts for the SRX110 Services Gateway on page 74
71Copyright © 2012, Juniper Networks, Inc.

Juniper SRX110 Specifications

General

Brand	Juniper
Model	SRX110
Category	Gateway
Language	English