CHAPTER 10
Installation Overview
•
Installation Overview for the SRX110 Services Gateway on page 77
•
Required Tools and Parts for Installing and Maintaining the SRX110 Services
Gateway on page 78
Installation Overview for the SRX110 Services Gateway
After you prepare your installation site, you are ready to unpack and install the services
gateway. It is important to perform the installation procedure as indicated in Table 29
on page 77.
Table 29: Installation Procedure for the SRX110 Services Gateway
Additional InformationTaskStep
“SRX110 Services Gateway General Safety
Guidelines and Warnings” on page 45
Review the safety guidelines.1
“Site Preparation Checklist for the SRX110 Services
Gateway” on page 35
Verify that you have prepared your
site for the installation of the
services gateway in accordance
with the checklist.
2
“Unpacking the SRX110 Services Gateway” on
page 81
Unpack the services gateway and
verify that all parts are received.
3
Preparing the SRX110 Services Gateway for
Rack-Mount, Desk-Mount, and Wall-Mount
Installation
Prepare the services gateway for
installation.
4
“Installing the SRX110 Services Gateway in a Rack”
on page 89
“Installing the SRX110 Services Gateway on a Desk”
on page 93
“Installing the SRX110 Services Gateway on a Wall”
on page 95
Install the services gateway.5
“Connecting and Organizing the SRX110 Services
Gateway Interface Cables” on page 102
Connect cables to external devices.6
77Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
