EasyManuals Logo
Home>Juniper>Gateway>SRX110

Juniper SRX110 User Manual

Juniper SRX110
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
CHAPTER 15
Autoinstallation
•
SRX110 Services Gateway Autoinstallation Overview on page 109
SRX110 Services Gateway Autoinstallation Overview
The autoinstallation process begins any time a services gateway is powered on and
cannot locate a valid configuration file in the internal flash memory device. Typically, a
configuration file is unavailable when a services gateway is powered on for the first time
or if the configuration file is deleted from the internal flash memory device.
The autoinstallation feature enables you to deploy multiple services gateways from a
central location in the network.
If you are setting up many devices, autoinstallation can help automate the configuration
process by loading configuration files onto new or existing devices automatically over
the network. You can use either the J-Web configuration editor or the command-line
interface (CLI) configuration editor to configure a device for autoinstallation.
For the autoinstallation process to work, you must store one or more host-specific or
default configuration files on a configuration server in the network and have a service
available—typically Dynamic Host Configuration Protocol (DHCP)—to assign an IP address
to the services gateway.
Autoinstallation occurs automatically when you connect an Ethernet port on a new
services gateway to the network and power on the device. To simplify the process, you
can explicitly enable autoinstallation on a device and specify a configuration server, an
autoinstallation interface, and a protocol for IP address acquisition.
For more information about configuring autoinstallation, see the following guides:
•
Junos OS Initial Configuration Guide for Security Devices
•
Junos OS Monitoring and Troubleshooting Guide for Security Devices
Related
Documentation
• Connecting the SRX110 Services Gateway to the Power Supply on page 101
• Grounding the SRX110 Services Gateway on page 103
• Powering On the SRX110 Services Gateway on page 105
• Powering Off the SRX110 Services Gateway on page 105
109Copyright © 2012, Juniper Networks, Inc.

Table of Contents

Other manuals for Juniper SRX110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX110 and is the answer not in the manual?

Juniper SRX110 Specifications

General IconGeneral
BrandJuniper
ModelSRX110
CategoryGateway
LanguageEnglish

Related product manuals