Placing the Original on the Machine - (continued)
6-6
Placing Originals on the Platen Glass
Use the platen glass for originals that cannot be placed in the RADF (such as a book or thick/
thin originals).
1. Open the RADF.
2. Place the original FACE DOWN in the left rear corner, align-
ing the edge with the left measuring guide.
3. Gently close the RADF.
Sending Multiple Originals from the Platen Glass
Originals that cannot be sent with the RADF can be sent by using the platen glass. In this
case, originals are sent by memory transmission.
1. Press [FAX ] on the control panel to open the FAX Basic
screen.
2. Select a remote station.
3. Set the desired functions as necessary.
To Next Page
Loading...
Need help?
General
