Konica Minolta 7145 - Transmitting Originals by Using both the RADF and the Platen Glass

Placing the Original on the Machine - (continued)
6-8
Transmitting Originals by Using both the RADF and the Platen
Glass
You can scan originals by using both the RADF and the platen glass and you can also scan
large amounts of originals by placing them on the RADF in batches. In such cases, memory
transmission will automatically be used.
1. Press [FAX ] on the control panel to open the FAX Basic
screen.
2. Select a remote station.
3. Set the desired functions as necessary.
4. Place the original on the RADF or the platen glass and press
STORE and then press [START].
Document placed on the RADF will take precedence over those on the platen glass.
5. Place the next original on the RADF or the platen glass and
press [START].
Repeat this procedure until all originals to be sent have been scanned.
The scanned originals are stored in memory.
DETAILS