3
Basic copy operations
3-60 bizhub 501/421/361 (Version 2)
3.10 Selecting the density settings
Specify the copy density and background density. Adjust to the best density according to the status of the
originals.
The following two density adjustments are available.
The following procedures describe how to specify the density settings.
3.10.1 Adjusting the print density (Density settings)
1 In the Basic screen, touch [Density/Background].
The Density/Background Removal screen appears.
Function Description
Density The print image density can be adjusted to one of nine levels.
Each time [Lighter] or [Darker] is touched, the density is lightened or darkened by one
level.
Touch [Standard] to select the middle setting of the nine levels.
Touch [Auto] to automatically adjust the density level according to the original being
copied.
Background Removal The density of the background color of the original can be adjusted to one of nine
levels.
Each time [Light] or [Dark] is touched, the background density is lightened or dark-
ened by one level.
Touch [Standard] to select the middle setting of the nine levels.
To Next Page
Loading...
Need help?
General
