3
Basic copy operations
3-72 bizhub 501/421/361 (Version 2)
3.11.5 Punching holes in copies (Punch settings)
!
Detail
In order to be punch holes in the copies, all of the following conditions must be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the original is positioned. If an Original
Direction setting is not selected, holes may not be punched in the copies as desired.
For details on specifying the original orientation, refer to "Selecting the original orientation
(Original direction settings)" on page 3-25.
2
Note
The Punch settings are available only if the Punch unit PU-501 is installed on the optional Finisher
FS-522, or if the optional Finisher FS-523 is installed.
Finisher FS-522
Finisher FS-523
Paper weight Paper size
Plain paper (60 g/m
2
to 90 g/m
2
)
Thick paper (91 g/m
2
to 163 g/m
2
)
4-Hole: A3 w to B5 w/v
Paper weight Paper size
Plain paper (60 g/m
2
to 90 g/m
2
)4-Hole: A3 w to B5 w/v
To Next Page
Loading...
Need help?
General
