7
Copy paper/originals
7-20 bizhub 501/421/361 (Version 2)
7.3 Paper type setting for a tray
This section describes the procedure for specifying a type of paper loaded in each tray.
Paper weight available in trays other than the bypass tray is limited from 60 g/m
2
to 90 g/m
2
. Available paper
types are plain paper, letterhead, colored paper, recycled paper, and user paper of the weight mentioned
above.
2
Note
Selecting "Letterhead" will change the print side to the reverse side.
If a special paper type is selected, that tray is not selected automatically with the "Auto" Paper setting.
The auto tray switch feature applies only to the trays specified with the same paper type setting.
Specifying a paper type
1 Press the [Utility/Counter].
The Utility/Counter screen appears.
2 Touch [2 User Settings], [1 System Settings], [3 Paper Tray Settings], and [5 Paper Type] in sequence.
The Paper Type Settings screen appears.
To Next Page
Loading...
Need help?
General
