bizhub 501/421/361 (Version 2) 14-37
Authentication unit (IC Card Type AU-201)
14
14.5 Care of Authentication unit (IC Card type) AU-201
2
Reminder
Before cleaning this device, disconnect it from the multifunctional product. If a force is applied to the
USB port, it may be damaged.
When cleaning this device, do not allow water to enter the device, otherwise the system may be
damaged.
Never use organic solvents, such as benzine or alcohol, to clean this device, otherwise it may be
damaged.
2
Note
When disconnecting or connecting this device, turn off the multifunctional product with the main power
switch, and then wait at least 10 seconds before turning it on again. The machine may not operate
correctly if it is turned on immediately after being turned off.
Hold the plug when plugging and unplugging the USB cable, otherwise the cable may be damaged.
Frequency: Once a month, or when it is dirty
Wipe this device with a soft, dry cloth. If this device cannot be cleaned by wiping it, wash it with a cloth
dampened with a mild detergent and wrung out well. After this device is cleaned, rinse the cloth and wring it
out well before wiping off the detergent.
14.6 Specifications
Item Description
Product name Authentication unit (IC Card Type) AU-201
Dimensions Approx. 92 mm (W) e 64 mm (D) e 16 mm (H)
Weight Approx. 120 g
Power requirements Through USB port
Environment conditions
(when operating)
Temperature 0 to 40 °C
Humidity 20 to 85% (Must be no condensation)
Environment conditions
(when not operating)
Temperature -20 to 50 °C
Humidity 20 to 85% (Must be no condensation)
Radio waves classification Induced reading/writing communication equipment
Compatible card
Processor
Contactless IC card compliant with ISO 14443 Type A, Felica, SSFC,
and FCF
Computer Processor PC/AT compatible, 1 GHz or more
Memory 128 MB or more
Hard disk drive Available hard disk space: 600 MB or more
Monitor 800 e 600 pixels, 16-bit color or more
Network TCP/IP protocol
Application Microsoft Internet Explore 6.0 (SP1) or later
Microsoft .NET Framework 2.0 (Windows 2000)
Microsoft .NET Framework 2.0 SP2 (Windows XP)
Microsoft .NET Framework 3.5 SP1 (Windows Vista)
Interface USB 1.1 or later
Supported operating
systems
Windows 2000 Professional (Service Pack 4)
Windows XP Professional Edition (Service Pack 3) or later
Windows XP Professional x64 Edition (Service Pack 2) or later
Windows Vista Enterprise (Service Pack 2) or later
*
Windows Vista Ultimate (Service Pack 2) or later
*
*
: Available in 32-bit (x86)/64-bit (x64) environment
To Next Page
Loading...
Need help?
General
