bizhub 501/421/361 (Version 2) 2-31
Before making copies
2
!
Detail
The following are cleared when the sub power switch is turned off.
Scan data in process
Transmission data in process
When the main power switch is turned off, the following are cleared in addition to the above.
Settings that have not been programmed
Jobs queued to be printed
Programmed jobs and stored jobs will not be cleared even when the main power switch or the sub
power switch is turned off.
2.3.4 Automatically clearing settings (automatic panel reset)
If no operation is performed for a specified length of time (even if the [Reset] key is not pressed), settings that
have not been programmed, such as the number of copies, are cleared and return to their default settings.
This is the automatic panel reset operation.
As the factory default, the automatic panel reset operation is performed after 1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed and whether or not it is
performed can be set from Utility mode. For details, refer to "System Settings" on page 12-28.
Whether or not the automatic panel reset operation is performed when there is a change of user can be
set from the Utility mode. For details, refer to "System Settings" on page 12-28.
2.3.5 Automatically canceling the mode screen (System Auto Reset)
If no operation is performed for a specified length of time, the screen is automatically changed to that for the
mode given priority.
This is the System Auto Reset operation.
As the factory default, the Copy mode screen is displayed after 1 minute.
!
Detail
The mode screen that is displayed when the System Auto Reset operation is performed can be changed
from the Utility mode. For details, refer to "System Settings" on page 12-28.
To Next Page
Loading...
Need help?
General
