bizhub 501/421/361 (Version 2) 2-27
Before making copies
2
2.3 Turning on the main power and the sub power
This machine has two power controls: the main power switch and the sub power switch.
2.3.1 Turning on the machine
The main power switch turns on/off all functions of the machine. Normally, the main power switch is turned
on.
The sub power switch turns on/off machine operations, for example, for copying, printing or scanning. When
the sub power switch is turned off, the machine enters a state where it conserves energy.
1 Open the front door, and then set the main power switch to "n".
2 Close the front door.
3 Press the sub power switch.
Check that the touch panel is turned on.
To Next Page
Loading...
Need help?
General
