4
Additional copy operations
4-30 bizhub 501/421/361 (Version 2)
4.8.3 Setting the "Key Repeat Start/Interval Time" functions
The length of time until the value begins to change after a touch panel button is held down and the length of
time for the value to change to the next number can be specified.
0 The settings specified for the Key Repeat Start/Interval Time functions are only applied in the Enlarge
Display mode.
1 Display the Accessibility Setting screen.
– For details on displaying the Accessibility Setting screen, refer to "Displaying the accessibility
setting screen" on page 4-28.
2 Touch [Key Repeat Start/Interval Time] or press the [2] key in the keypad.
The Key Repeat Start/Interval Time screen appears.
To Next Page
Loading...
Need help?
General
