bizhub 501/421/361 (Version 2) 7-11
Copy paper/originals
7
7.2 Selecting the paper settings for bypass tray
This section describes the procedures for specifying the size and type of paper loaded in bypass tray.
!
Detail
For details on loading the paper into the bypass tray, refer to "Loading paper into the bypass tray" on
page 2-57.
7.2.1 Automatically detecting the paper size ("Auto Detect" setting)
The size of the paper loaded into bypass tray can be detected automatically.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General
